DDD-F-416F
TABLE IV Visual inspection of finished flags. - continued
EXAMINE
DEFECT
CLASSIFICATION
MAJOR MINOR
Hems uneven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
X
Hem on wrong side of flag . . . . . . . . . . . . . . . . . . . . . .
X
Reinforcement patches
Positioned on face side of flag . . . . . . . . . . . . . . . . . . .
X
Portion of patch at heading not inserted within the
heading as specified . . . . . . . . . . . . . . . . . . . . . . . . .
X
Not same color or material as section reinforced . . . .
X
Size or shape of patch not as specified . . . . . . . . . . . .
X
Fringe
Not completely attached as specified . . . . . . . . . . . . . .
X
Ends of fringe not caught in heading stitching . . . . . . .
X
Not one continuous length . . . . . . . . . . . . . . . . . . . . . .
X
Not stitched to the front side of the flag . . . . . . . . . . . .
X
Not evenly attached around the flag . . . . . . . . . . . . . .
X
Stitching of fringe not through center portion of the
fringe heading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
X
1/2 of fringe not visible on reverse side of flag . . . . . . .
X
Headings: Type I,
Lower end of line not passed through snap hook &
Classes 1 & 3
sewn to itself, as applicable . . . . . . . . . . . . . . . . . . . .
X
Length of zig-zag stitching not as specified . . . . . . . . .
X
Zig-zag stitching not sewn completely through all
thicknesses of heading and line at any of the re-
quired locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
X
Lower edge of ring more than 1/2 inch above or within
the upper end of heading, as applicable . . . . . . . . . .
X
Ends of heading not closed by 2 rows of stitching up
to distance line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
X
Free end of distance line not whipped as specified . . .
X
Sides and ends of duck cloth heading out of align-
ment, seriously affecting appearance . . . . . . . . . . . .
X
Sides and ends of duck cloth heading out of align-
ment, affecting appearance but not seriously . . . . . .
X
Headings: Type I,
Class 2
Grommet clinched too tightly, cutting cloth . . . . . . . . .
X
Wrong type of grommet . . . . . . . . . . . . . . . . . . . . . . . .
X
Grommet improperly set, e.g., clinched too loosely,
allowing grommet to rotate . . . . . . . . . . . . . . . . . . . . .
X
Sides & ends of duck cloth heading out of alignment,
seriously affecting appearance . . . . . . . . . . . . . . . . .
X
Sides & ends of duck cloth heading out of alignment,
affecting appearance but not seriously . . . . . . . . . . .
X
Headings: Type I,
Class 4
Grommet clinched too tightly, cutting cloth . . . . . . . . .
X
Wrong type grommet . . . . . . . . . . . . . . . . . . . . . . . . . .
X
Grommets improperly located . . . . . . . . . . . . . . . . . . .
X
Sides & ends of duck cloth heading not properly
aligned, seriously affecting appearance . . . . . . . . . . .
X
18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business