DDD-F-416F
TABLE III. Testing of Components. - continued
REQUIREMENT
TEST
RESULTS
COMPONENT
CHARACTERISTIC
PARAGRAPH
METHOD
REPORTED AS
ASTM-D5034
Cotton duck
Breaking strength
3.3.2
Grab Test
nearest 1 lb
Marking for Type I
Colorfastness to acceler-
AATCC-111,
heading
ated weathering
3.8.1
Option A 1/
pass/fail
1/ With a time exposure of 100 standard hours.
4.3.3 In-process inspection. Inspection may be performed at any point or during any phase of
the manufacturing process to determine compliance with the requirements of Section 3. The
Government reserves the right to exclude from consideration for acceptance any material or
component for which in-process inspection has indicated nonconformance.
4.3.4 Inspection of the end item.
4.3.4.1 Visual inspection of finished flags. Examination of flags for the defects shown in TABLE
IV shall be made at a distance of 18 to 40 inches with good illumination. Inspection level shall
be I; AQL's expressed in defects per 100 units shall be 4.0 for major defects and 10.0 total for
major and minor. One finished flag shall be equal to one unit.
TABLE IV Visual inspection of finished flags.
EXAMINE
DEFECT
CLASSIFICATION
MAJOR MINOR
Quality of cloth
Type
Any component not fabricated of specified material . .
X
Color
Basic colors other than specified . . . . . . . . . . . . . . . . .
X
Off shades, seriously affecting appearance . . . . . . . . .
X
Off shades, affecting appearance but not seriously . .
X
Material
Hole, cut, tear, smash, or weak place . . . . . . . . . . . . .
X
Spots, stains, streaks, or shade bars affecting appear-
ance seriously . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
X
Spots, stains, streaks, or shade bars affecting appear-
ance, but not seriously . . . . . . . . . . . . . . . . . . . . . . . .
X
Two or more contiguous broken or missing ends or
picks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
X
Double pick, coarse pick, or mispick clearly noticeable
X
Slub, slough-off, float, or skips seriously affecting
appearance or serviceability . . . . . . . . . . . . . . . . . . .
X
Slub, slough-off, float, or skips affecting appearance
or serviceability, but not seriously. . . . . . . . . . . . . . . . .
X
Quality of distance line
Type
Not fabricated of specified material . . . . . . . . . . . . . . .
X
Twist or braiding
Uneven or loose, resulting in weak place . . . . . . . . . . .
X
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business