MIL-DTL-14650B
4.4 Conformance inspection. Quality assurance inspection of components and
materials shall be in accordance with the subsidiary specifications and drawings. Sampling
for inspection shall be performed in accordance with ANSI/ASQC Z1.4.
4.4.1 Certificate of compliance. Grommets specified in 3.3.2 may be accepted on the
basis of the contractor's certificate of compliance for requirements specified.
4.4.2 In-process inspection. In-process inspection shall be made at any point or during
any phase of the manufacturing process to determine whether operation or assemblies are
accomplished as specified. The Government reserves the right to exclude from
consideration for acceptance any material for which in-process inspection has indicated
nonconformance. In-process inspection shall be conducted to see that accomplishment of
the following is in accordance with the specification requirements.
REQUIREMENT, OPERATION OR ASSEMBLY
REQUIREMENT PARAGRAPH
Ribbon
3.4.1
Thread checked at machine
3.4.3
Fly end construction
3.6.1
Heading construction
3.6.2
Turn-in, Turn under of seams
3.6.2
Embroidery design
3.6.3
4.5. Inspection of the end item. A one hundred percent inspection shall be performed
on end item streamers.
4.5.1 Visual examination of streamers. Examination of streamers for defects in design,
material, construction and workmanship shall be made using Table 1. Examination shall be
made at a distance of approximately 16 to 22 inches with illumination equal to average
daylight and arranged so as to avoid as much reflected light as possible. Defects
designated by an asterisk (S) shall be classified as major when seriously affecting
appearance or serviceability and minor when affecting appearance or serviceability but not
seriously. The unit of product for the examinations shall be one completely fabricated
streamer. Any dimension which is not within the specified tolerance shall be classified as a
defect.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business