NOT MEASUREMENT SENSITIVE
MIL-DTL-14650B
18 November 1998
SUPERSEDING
MIL-S-14650A
20 June 1986
DETAIL SPECIFICATION
STREAMERS, GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and Agencies
of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for streamers used on Armed
Forces flags and guidons (see 6.1).
1.2 Classification. The streamers covered by this specification will be the following
types,' sizes, classes, and style.
Type I
- Streamer Set (See applicable specification sheet)
Type II - Individual Streamers
Class 1 - Army (Specification Sheet 1)
Class 2 - Marine Corps (Specification Sheet 2)
Class 3 - Navy (Specification Sheet 3)
Class 4 - Air Force (Specification Sheet 4)
Class 5 - Unit Awards (Specification Sheet 5)
Class 6 - Coast Guard (Specification Sheet 6)
Size 1 - 2-3/4 inches wide and 4 feet long
Size 2 - 2-3/4 inches wide and 3 feet long
Size 3 - 1-3/8 inches wide and 2 feet long
Style - See applicable specification sheet for style number.
1.3 Classification. Ribbons covered by this specification will be as specified on the
applicable military specification sheet (see 2.2 and 6.2).
Beneficial comments (recommendations, additions, deletions) and any pertinent data which
may be of use in preparing this document should be addressed to: Director, The Institute of
Heraldry, US Army, 9325 Gunston Road, Room S112, Fort Belvoir, VA 22060-5579, by using
the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of
this document.
AMSC N/A
FSC 8345
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business