MIL-DTL-14631C
change in brightness on the face of the star except along the edges where
a slight darkening may occur.
3.9 Government loaned hubs. Hubs for the star will be loaned by the
Government and shall be used for making the contractor's working dies
necessary for one contract or order.
3.10 Workmanship. The assembled plates shall be clean, well made
and shall meet the acceptable quality levels established by this
specification.
4.
VERIFICATION
4.1 Responsibility for inspection. Unless otherwise specified in the
contract or purchase order, the contractor is responsible for the
performance of all inspection requirements (examinations and tests) as
specified herein. Except as otherwise specified in the contract or
purchase order, the supplier may use his own or any other facilities
suitable for the performance of the inspection requirements specified
herein, unless disapproved by the Government. The Government reserves the
right to perform any of the inspections set forth in the specification
where inspections are deemed necessary to assure supplies and services
conform to the prescribed requirements.
4.1.1 Responsibility for compliance. All items shall meet all
requirements of section 3. The inspections set forth in this
specification shall become a part of the contractor's overall inspection
system or quality program. The absence of any inspection requirements in
the specification shall not relieve the contractor of the responsibility
of ensuring that all products or supplies submitted to the Government for
acceptance comply with all requirements of the contract. Sampling
inspection, as part of manufacturing operations, is an acceptable practice
to ascertain conformance to requirements; however, this does not authorize
submission of known defective material, either indicated or actual, not
does it commit the Government to accept defective material.
4.2 Classification of inspections. The inspection requirements
specified herein are classified as follows:
a.
First article inspection (see 4.4).
b.
Conformance inspection (see 4.5).
4.3 Inspection conditions. Unless otherwise specified, all
inspection shall be performed in accordance with the test conditions
specified in 4.5 and 4.6 in the specification.
4.4 First article inspection. Inspection and testing of the first
article (see 3.2) shall be made of a completely finished item for all
provisions of this specification applicable to the end product examination
and tests.
4.5 Conformance inspection. Inspection shall be in accordance with
the provisions set forth herein, except where otherwise indicated (see
6.3).
4.5.1
Inspection of components.
4.5.1.1 Component testing. In addition to the verification
provisions of the subsidiary specifications and drawings, testing shall be
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business