MIL-DTL-14631C
(Application for copies of the Pantone Matching System should be
addressed to Pantone, Inc., 590 Commerce Boulevard, Carlstadt, N.J.
07072.)
(Non-government standards and other publications are normally available
from the organizations that prepare or distribute the documents. These
documents also may be available in or through libraries or other information
services.)
2.4 Order of precedence. In the event of a conflict between the text of
this document and the references cited herein (except for related associated
specifications or specification sheets), the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3.
REQUIREMENTS
3.1 Specification sheets. The individual item requirements shall be
as specified herein and in accordance with the applicable specification
sheet. In the event of any conflict between the requirements of this
specification and the specification sheet, the latter shall govern.
3.2 First article. When specified (see 6.2), a sample shall be
subjected to first article inspection in accordance with 4.4.
3.3 Standard sample. Unless otherwise specified (see 6.2), the
contracting officer shall furnish a standard sample of the plate which
shall be used for matching color and finish only. Variation from this
specification may appear in the standard sample; however, in such cases
the specification shall govern.
3.4 Recycled, recovered, or environmentally preferable materials.
Recycled, recovered, or environmentally preferable materials should be
used to the maximum extent possible provided that the material meets or
exceeds the operational and maintenance requirements and promotes
economical advantageous life cycle costs.
3.5 Material. The material shall be as specified herein. Where
materials are not definitely specified, the materials shall be of the
quality normally used in sound commercial practice. Recovered material
shall be used to the maximum extent possible.
3.5.1 Aluminum. Aluminum for the plate shall be any commercial
alloy sheet of half-hard or harder. Care should be taken to insure the
alloy selected is capable of being finished as required.
3.5.2 Brass.
Brass for the stars and studs shall be any type
commercial brass.
3.5.3 Primer. Primer shall be a spray application type having low-
moisture-sensitivity and corrosion-inhibiting properties for use on
surface-treated aluminum surfaces.
3.5.4 Lead-free Enamel. Lead-free enamel shall be an air drying,
high gloss alkyd enamel for use on primed exterior metal surfaces. The
enamel shall be lead and chromate free and meet air pollution requirements
for solvent emissions. The color shall match the color of the standard
sample.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business